Introduction and definitions
In inland navigation, exchanging information is crucial. The primary goal is to ensure safe, efficient transport and the optimal use of inland waterways. River Information Services (RIS) are the harmonised information services that enable information to be provided, transmitted, received and processed. The aim is to improve traffic and transport management in inland navigation, including interfaces with other modes of transport.
The RIS meet a range of needs. The services defined in the context of RIS are:
For traffic
- Fairway information service
- Visual navigation aids
- Radiotelephony on inland waterways
- Internet
- Electronic navigation chart service
- Traffic information service
- Tactical traffic information
- Strategic traffic information
- Traffic management
- Local traffic management (vessel traffic services – VTS)
- Navigation assistance
- Bridge and lock management
- Accident prevention assistance (Calamity abatement support)
For transport
- Logistic transport information
- Voyage planning
- Transport management
- Intermodal and terminal management
- Cargo and fleet management
- Information for law enforcement
- Statistics
- Waterway charges and harbour dues
The development and implementation of RIS required certain terms to be defined. Working Group 125 of the World Association for Waterborne Transport Infrastructure (PIANC) has compiled a document that brings together the key definitions from a range of sources. PIANC and the Central Commission for the Navigation of the Rhine (CCNR) have agreed that the PIANC definitions for RIS will be published and updated on the website of the CCNR: www.risdefinitions.org.
History of RIS at the CCNR
In 1998, the CCNR invited its technical committees to assist in the development of RIS (Resolution 1998-I-24![]()
). In 2001, the Central Commission created the RIS Working group. This group, focussing specifically on RIS, was established under the authority of the Police Regulations Committee (Resolution 2001-II-19). The CCNR then adopted the Guidelines and Recommendations for River Information Services (RIS Guidelines), the Guidelines for Inland VTS and the RIS Standards.
Based on the RIS Standards, in 2010 the CCNR introduced mandatory electronic reporting for certain types of vessel. This mandatory reporting was gradually extended over the course of time. The full list of vessels and convoys subject to mandatory electronic reporting is set out in Article 12.01 of the Rhine Police Regulations (RPR). The Electronic reporting (ERI) page has more information on this.
The CCNR also established the regulatory and organisational conditions for the mandatory installation and use of Inland AIS and Inland ECDIS equipment (or comparable electronic device for displaying electronic charts) in Rhine navigation. These obligations entered into force on 1 December 2014 for most vessels and convoys (Resolution 2013-II-16![]()
![]()
). The full list of the vessels concerned, and the details of these obligations are set out in Article 4.07 of the RPR.
Lastly, since the 1960s and 1970s, the CCNR has set the requirements for the use of radio and radar, contained in Articles 4.05 and 4.06 of the RPR.
Since 2015, the CCNR has been supported by the CESNI, the European Committee for drawing up Standards in the field of Inland Navigation, in maintaining and developing the RIS Standards. The permanent Working group on information technologies (CESNI/TI) started work on 1 January 2019: its objective is the harmonisation of RIS Standards at a European level.
The European Standard for River Information Services (ES-RIS) and the European Standard laying down Technical Requirements for Inland Navigation vessels (ES-TRIN) are the two standards now referenced by the CCNR in its RIS regulations, replacing the CCNR RIS Standards.
RIS regulation and standards
The Rhine Police Regulations (RPR) is the instrument used to implement the RIS Standard adopted by the CCNR (ES-RIS) on the Rhine. In the same way, Article 1.03 of the Rhine vessel inspection regulations (RVIR) lays down that “The vessels, floating establishments or floating installations for which an inspection certificate is to be issued must comply with the requirements of the present regulation and of the ES-TRIN.” The main requirements of the RPR (which refers to the ES-RIS) and the RVIR (which refers to the ES-TRIN) are set out in the table below.
Content of the Police regulations for the navigation of the Rhine (RPR)
Article 4.05
Use of radiotelephony; general requirements relating to radiotelephone equipment.
Article 4.06
Use of radar; general requirements relating to radar equipment.
Article 4.07, (1) and (2)
Obligation to install and use Inland AIS in Rhine navigation (since 1 December 2014).
Refers to Part II of the ES-RIS
Article 4.07, (3)
Obligation to install and use Inland ECDIS equipment in information mode (or a comparable electronic device for displaying charts).
Use of up-to-date electronic inland navigation chart (since 1 December 2014).
Refers to Part II of the ES-RIS
Article 12.01
Reporting obligation (radiocommunication, electronic reporting)
Refers to Part IV of the ES-RIS
Content of the Rhine vessel inspection regulations (RVIR)
Article 1.02 of the Rhine vessel inspection refers to the ES-TRIN
Article 7.06, (1)
Basic technical requirements for radar installations and rate-of-turn indicators.
Article 7.06, (2)
Basic technical requirements for Inland ECDIS devices in navigation mode.
Article 7.06, (3)
Exigences techniques fondamentales concernant les appareils AIS Intérieur
Basic technical requirements for Inland AIS.
Annex 5, section I
Minimum requirements and test conditions for navigational radar installations in inland navigation
Annex 5, section II
Minimum requirements and test conditions for rate-of-turn indicators in inland navigation
Annex 5, section III
Requirements for installation and performance tests for navigational radar installations and rate-of-turn indicators in inland navigation
Annex 5, section IV
Minimum requirements, requirements for installation and performance tests for Inland AIS equipment in inland navigation
Annex 5, section VI
Installation and performance certificate for navigational radar installations and rate-of-turn indicators, Inland AIS equipment and tachographs in inland navigation
In summary, vessels and convoys navigating on the Rhine must comply with the RPR and the RVIR. With regard to RIS, this means that they mist be in possession of:
- radiotelephone equipment allowing simultaneous two-channel reception (ship-to-ship and ship-to-shore),
- an Inland ECDIS device (in information mode) using up-to-date electronic inland navigation charts, or a comparable device for displaying charts,
- an Inland AIS device.
The regulations provide for certain categories of vessel to be exempted from these obligations.
Additionally, the CCNR and the inland waterway authorities recommend that the information provided by the RIS and other services be used whenever possible. To this end, it is desirable that vessels should also be fitted with:
- a radar for displaying traffic in the immediate vicinity of the vessel,
- a PC with mobile data communication equipment (mobile phone) for sending and receiving e-mails, internet services and electronic reporting,
- Inland ECDIS equipment in navigation mode (i.e. connected to the radar). This increases navigation safety.
All decisions relating to navigating and manoeuvring the vessel are the responsibility of the boatmaster. The information provided by the RIS is not a substitute for the decisions to be taken by the boatmaster.
Bodies
The RIS Working group (RIS/G) was established by Resolution 2001-II-19![]()
![]()
. It deals with questions relating to RIS and works under the authority of the Police Regulations Committee (RP).
Initially the RIS Working group was formed as an extension of a Working group for Inland ECDIS and technologies such as Inland AIS, electronic reporting and operating a vessel traffic service (VTS). This Working group facilitated the development and adoption of the first RIS Standards in the fields of Inland ECDIS, electronic reporting and vessel tracking and tracing systems.
Following the creation of Working group CESNI/TI in 2019, the CESNI took on the task of supporting the CCNR by developing RIS Standards, particularly the ES-RIS.
For its part, the RIS Working group has shifted its focus to the implementation of RIS on the Rhine. As the Rhine has always been at the forefront of innovation in Europe, the RIS Working group is helping to identify new needs. This leads to proposals for changes to the ES-RIS, as well as to equipment in conjunction with the RIS regulated by the ES-TRIN.
Based on the proposals submitted by its Committees and Working groups, the CCNR plenary meeting rules on the amendments to its regulations. At operational level, the plenary meeting has transferred the power of decision in some areas relating to RIS to the RIS Working group or the Police Regulations Committee:
| Guidelines / Directives | Decision-making powers | Resolution |
|---|---|---|
| Guidelines and Recommendations for River Information Services (2002 RIS Guidelines) | The CCNR charges its Police and Inspection Regulations Committees […] with updating these guidelines with the help of its RIS Working group and in co-operation with already existing international expert groups. | |
| Guidelines and Criteria for Vessel Traffic Services on Inland Waterways (2006 VTS Guidelines) | The CCNR charges its Police Regulations Committee with updating […] these guidelines and criteria with the help of its RIS Working group. | |
| Regional part of the radiocommunication guide | The CCNR has adopted the new edition of the radiocommunication guide for inland navigations and charges its Police Regulations Committee with updating the regional part. This Committee has further delegated this task to the Police Regulations Working group. |
Every two years, the RIS Working group submits a work programme setting out the priorities and future tasks to the Police Regulations Committee.
The RIS Working group traditionally meets 3 times a year, in Strasbourg (see the meeting calendar).
Secretariat: Mr Raphaël LE GUILLOU, Administrator responsible for matters relating to information technologies in inland navigation
Cooperation with the European Commission
The CCNR is keen to maintain a close partnership with the European Commission regarding the development and harmonisation of RIS at European level.
The work carried out by the CCNR provided a good foundation for Directive 2005/44/EC of the European Parliament and of the Council on harmonised river information services (RIS) on inland waterways in the Community. This directive is currently being revised. The CCNR also ensures that its regulations are harmonised with the Community regulations.
In this context the CESNI acts as a common body serving both the CCNR and the European Union: their respective regulations both refer to the standards adopted by the CESNI.