Introduction
The Central Commission for the Navigation of the Rhine (CCNR) and its Member States are convinced of the need for automatic systems for the exchange of navigational data. Such exchanges may be between vessels or between vessels and the shore. They support automatic identification as well as vessel tracking and tracing systems (VTT) for inland navigation. Vessel tracking provides up-to-date information on the status, position and characteristics of a vessel, including information about its cargo if required. Vessel tracing allows the position of a vessel to be determined. These systems play an important role in improving safety and ensuring well-managed navigation.
In order to enable vessel tracking and tracing, the IMO introduced the Automatic Identification System (AIS) for maritime navigation. Since the end of 2004, all seagoing vessels have been equipped with AIS (SOLAS, Chapter 5). To meet the needs of inland navigation, the AIS system has been developed to create “Inland AIS”. This remains fully compatible with the maritime AIS as well as with other existing inland navigation standards.
As AIS is a cooperative procedure, all users wishing to benefit it must be equipped with an AIS device. Vessels with AIS transmit data relating to the vessel and its current navigation data. They automatically and regularly receive the same information from other vessels equipped with an AIS device:
- identity of the vessel,
- its exact position,
- its course and speed,
- other information specific to the vessel.
The data provided by the AIS can be visualised in a number of ways. The most efficient is to display geo-referenced data, such as the position and movements of the vessel, together with its identity, on a chart, and to display static data in the form of an alphanumeric table.
AIS shore stations within VHF radio range can also receive the data and in turn broadcast navigation-related information to vessels.
AIS is a supplementary source of navigational data. It does not replace services such as radar tracking or VTS, rather it makes an additional contribution. The strength of AIS is the ability to detect and track vessels equipped with an AIS device. Their different characteristics mean that AIS and radar complement each other.
History
In 2006, the CCNR adopted Edition 1.0 of the Vessel Tracking and Tracing Standard for Inland Navigation. The standard was published in 2007 and in that same year it was incorporated into the legislation of the European Commission (Directive (EC) No 415/2007 of 13 March 2007![]()
![]()
![]()
). Chapter 1 of the document covers tracking and tracing as used in inland navigation. Chapter 2 describes the Inland AIS Standard, along with the possible messages occurring. Edition 1.01 of this Standard was published by the CCNR in October 2007.
In 2007, the CCNR supplemented this standard with the addition of Operational and Performance Requirements, Methods of Test and Required Test Results for Inland AIS Shipborne Equipment (Test Standard for Inland AIS, Edition 1.0). The Test Standard is based on the standard for maritime Class A equipment (Standard IEC 61993-2).
In order to complete and correct these two standards, in 2008 the CCNR published Technical Clarifications on Vessel Tracking and Tracing Standard for Inland Navigation, Edition 1.01 and Test Standard for Inland AIS, Edition 1.0 and the Test Standard for Inland AIS, Edition 1.0.
The standard IEC 61993-2 was revised in 2012, thereby making it necessary to carry out a general revision of the AIS Test Standard. This revision primarily allowed the removal of some inaccuracies and the addition of a number of new functions from Maritime AIS. Clarifications were also introduced regarding the message “Persons on board” and the entry “length and breadth of convoys”. The Test Standard Edition 2.0 was adopted in 2012, entering into force that same year on publication of the revised standard IEC 61993.
The tracking and tracing standard was amended in the European legislation by the Implementing Regulation (EU) No 689/2012 of 27 July 2012![]()
![]()
![]()
. Following the publication of this implementing regulation, in 2013 the CCNR adopted Edition 1.2 of the Vessel Tracking and Tracing Standard for Inland Navigation. In addition to harmonising this standard with the European regulation, the references to certain standards and recommendations were updated.
Since 2021, the Vessel Tracking and Tracing Standard for Inland Navigation has been integrated into Part II of the European Standard for River Information Services (ES-RIS), which covers vessel tracking and tracing systems.
Use of AIS
The use of AIS in Rhine navigation is regulated by the Rhine Police Regulations (RPR, Article 4.07).
In addition, the publication “Clarifications concerning the obligation of equipment with Inland AIS devices and Inland ECDIS devices![]()
![]()
![]()
” offers useful information for the boatmaster concerning the obligation to have such equipment and its use. This information document is regularly updated.
AIS equipment must be installed and configured correctly in order to ensure that it functions reliably. For this reason, the CCNR requires the installation to be carried out by a specialist company, which must also certify it in compliance with the ES-TRIN (Article 7.06 (3)).
The ES-TRIN also contains provisions relating to the approval of devices and equipment, as well as the companies and the technical services. The approval of equipment and companies is the responsibility of national authorities, in accordance with the regulatory framework (here the Rhine Vessel Inspection Regulations (RVIR) and Directive (EU) 2016/1629).
To this end, the website listes.cesni.eu contains lists of information on:
- competent authorities for approval of Inland AIS equipment,
- approved Inland AIS equipment,
- approved specialised companies for the installation or replacement of Inland AIS equipment.
The Inland AIS Guide![]()
![]()
![]()
explains the Standard, the functioning and use of Inland AIS, Inland AIS equipment and the data transmitted by the system. It also describes how the Standard is implemented in different European countries and lists the points of contact for further information.
Finally, the CESNI publishes “Guidelines on the Installation of the Inland Automatic Identification System“. This document offers a guide for specialised companies approved to install Inland AIS equipment in inland navigation vessels. It contains information on the fitting, configuration and testing of the equipment to ensure the equipment is set up correctly. This document should be used in conjunction with the installation instructions provided by the manufacturer.
Obligation to install and use Inland AIS in conjunction with Inland ECDIS
In parallel with the obligation to install and use Inland AIS, in 2013 the CCNR made it mandatory to install electronic chart display equipment. This can be either an Inland ECDIS device in navigation mode or a comparable device capable of displaying electronic charts.
This decision on chart display equipment was supplemented by three resolutions adopted in June 2014. The obligation to fit the equipment entered into force on 1 December 2014 and affects all vessels, with a few exceptions (such as small craft that do not have an inspection certificate and ferries).
Under these new obligations, the AIS equipment must be permanently switched on, other than in certain specific situations, as set out in the RPR, Article 4.07 (2). The boatmaster must therefore display the position of his vessel and that of other vessels fitted with AIS on an electronic chart. The information that must be transmitted is listed in Article 4.07 (5) of the RPR.
Further, the electronic inland navigation charts used in electronic chart display equipment linked to an AIS device must always be up to date. The Inland ECDIS used in information mode must comply with the requirements of Part I of the ES-RIS. The comparable device for displaying electronic charts and the electronic inland navigation chart must comply with the “Minimum requirements for devices displaying electronic inland navigation charts with a view to using Inland AIS data on board vessels” (Resolution 2021-1-12![]()
![]()
![]()
).
The CCNR has published an information brochure for boatmasters to assist in the implementation of these decisions![]()
![]()
![]()
. This document is regularly updated.