History
From the end of the 1990s, discussions and trials took place with the aim of improving the ease and safety of inland navigation even further through the use of telematics (a set of computer services provided via a telecommunications network). Also in the 1990s, as part of various research and development projects, work was carried out on the concept of superimposing the radar image on an electronic chart in the vessel’s wheelhouse.
Given that boatmasters could not use different equipment in each country, international collaboration was essential in order to arrive at a usable concept. It was therefore decided to adapt the Electronic Chart Display and Information System (ECDIS) for use in inland navigation. This system, initially developed for maritime navigation, had already been used and trialled internationally. The general idea was to introduce the ECDIS Standard, after adapting it to the specific needs of inland navigation, while still retaining the original standard published by the International Hydrographic Organization (IHO). This made it possible to ensure compatibility between ECDIS and Inland ECDIS. This is important at the mouths of rivers where both inland navigation and seagoing vessels are operating.
In 1998, the European Union tasked a group of experts with developing a standard for Inland ECDIS. The group pf experts submitted their first proposal on 1 January 1999. In parallel, in 2000, the competent committees of the CCNR set up an ad hoc Inland ECDIS Working group, tasked with developing a draft CCNR standard for Inland ECDIS. The first edition of the standard, based on a text drafted by this group, was adopted by the CCNR in 2001 (Resolution 2001-I-16![]()
![]()
). Since then, the standard has been regularly updated (Edition 1.01 in November 2001, Edition 1.02 in October 2003, Edition 2.0 in November 2006, etc.) to include the new IHO procedures as well as the work of the European group of experts on Inland ECDIS and the Inland ENC Harmonization Group (IEHG).
In 2008, in compliance with the mandate included in Edition 2.0 of the Inland ECDIS Standard, the above-mentioned groups adopted modifications to the ‘Encoding Guide’ for inland Electronic Navigation Charts (ENC). The ENC include primarily new objects, attributes and attribute values or new combinations of objects, attributes and attribute values. The CCNR then published Edition 2.1 of the Inland ECDIS Standard. In November 2011, the CCNR adopted Edition 2.3![]()
![]()
![]()
. This entered into force on 16 October 2012. The standard has been incorporated into European Commission legislation (Implementing Regulation (EU) No 909/2013 of 10 September 2013).
The Inland ECDIS Standard has been adopted not only by the CCNR but also by the Danube Commission, the UNECE and PIANC, making it the first standard in the field of inland navigation to have such wide international recognition.
Since 2021, the Inland ECDIS Standard has been integrated into Part I “Electronic Chart Display and Information System for inland navigation (Inland ECDIS)” of the European Standard for River Information Systems (ES-RIS).
Inland ECDIS operating modes
The Inland ECDIS “information” mode is essentially an electronic atlas that serves as a guide and provides information about the waterways. It is not intended to be used to navigate the vessel. When linked to a location sensor, the image on the chart is automatically updated so that the vessel is always shown in roughly the centre of the screen.
In parallel with the obligation to fit an Inland AIS device, in 2013 the CCNR made it mandatory to have Inland ECDIS equipment (or a comparable electronic device for displaying electronic charts) in “information” mode. This chart display equipment must be linked to an Inland AIS device and must always be used with an up-to-date inland navigation chart. For more information, see the “Inland AIS” page in the section “Obligation to install and use Inland AIS in conjunction with Inland ECDIS”.
The “navigation” mode refers to the use of Inland ECDIS to navigate the vessel, with the radar image superimposed. The Inland ECDIS devices able to operate in navigation mode are navigational radar installations as defined in the RVIR and the ES-TRIN (Article 7.06, (2)). This equipment must be type-approved. The position of the vessel must be determined by a permanent positioning system whose accuracy complies with the requirements for safe navigation defined in the ES-TRIN. Any person using Inland ECDIS equipment in navigation mode must hold a specific authorisation for radar navigation.
The CESNI regularly updates the list of Inland ECDIS equipment approved for navigation mode. This list is available on the dedicated website: listes.cesni.eu
CCNR publications
In 2021, the CCNR adopted the “Minimum requirements for devices for displaying electronic charts for inland navigation with a view to using Inland AIS data on board vessels” (Resolution 2021-1-12![]()
![]()
![]()
). Display equipment must meet these requirements.
For its part, the publication “Clarifications concerning the obligation of equipment with an Inland AIS device and an Inland ECDIS device![]()
![]()
![]()
” provides the boatmaster with useful information regarding the obligation to install this equipment and how to use it. This information brochure is regularly updated.
The Inland ECDIS Guide![]()
![]()
![]()
also explains ECDIS, the Inland ECDIS Standard, Inland ECDIS equipment, electronic charts and their production in Europe. In addition, it contains contact addresses for the relevant waterway authorities.
Finally, electronic inland navigation charts are available for all navigable stretches of the Rhine, as well as for many other navigable European waterways. The CCNR maintains an up-to-date list entitled “Electronic charts for use in navigation mode - Competent authorities and certified charts![]()
![]()
![]()
”.